Reference point markers - Medium
Markers for parts without special needs
Reference point markers - Medium are the most commonly used and are suitable for parts without special needs.
The size of the reference point markers depends on which 3D scanner and measuring volume is used for measuring the part.
N.B. Zebicon is the Danish distributor of Carl Zeiss GOM Metrology products, and therefore only takes care of the Danish market. Please contact your local distributor for a quote on the needed reference point markers.
0.4 mm reference point markers
Inner diameter: 0.4 mm
Outer diameter: 1.9 mm
Round, on adhesive foil in box
3.000 single point markers per box
0.8 mm reference point markers
Inner diameter: 0.8 mm
Outer diameter: 2.5 mm
Round, on adhesive foil in box
3.000 single point markers per box
1.5 mm reference point markers
Inner diameter: 1.5 mm
Outer diameter: 3.5 mm
Round, on adhesive foil in box
3.000 single point markers per box
3.0 mm reference point markers
Inner diameter: 3.0 mm
Outer diameter: 7.0 mm
Round, on adhesive foil as tear-off pad
3.000 single point markers per pad
5.0 mm reference point markers
Inner diameter: 5.0 mm
Outer diameter: 10.0 mm
Round, on adhesive foil as tear-off pad
3.000 single point markers per pad
8.0 mm reference point markers
Inner diameter: 8.0 mm
Outer diameter: 16.0 mm
Round, on adhesive foil as tear-off pad
3.000 single point markers per pad
